Updated Jan-2022 Test Engine to Practice JN0-635 Test Questions
JN0-635 Real Exam Questions Test Engine Dumps Training With 90 Questions
Recertification Details
You can recertify for the JNCIP-SEC through testing by passing the relevant professional-level exam, by nailing the expert-level exam to advance the certification level, or by attending courses by Juniper Networks or any Juniper Networks Authorized Education Partners. If you pass an exam or take a course that is at a higher level than the certification you opt to recertify, you can renew all lower-level designations within that certification track. For example, if you recertify the expert-level JNCIE-SEC certification either through testing or by a course, you would have effectively recertified the lower-level security certificates including the JNCIP-SEC, JNCIS-SEC, and JNCIA-SEC. This recertification is valid for another three years from the time you passed the recertification exam or course. If you fail to recertify by the end of the active period, you will have to re-earn the certification from scratch.
NEW QUESTION 39
Click the Exhibit button.
A host is unable to communicate with a webserver. Referring to the exhibit, which statement is correct?
- A. The session table is running out of resources
- B. The webserver is not listening for traffic on port 80
- C. A session is created for this flow
- D. A policy is denying the traffic between these two hosts
Answer: D
NEW QUESTION 40
Click the Exhibit button.
You deployed a site-to-site IPsec VPN connecting two data centers together using SRX5800s. After examining the performance of the IPsec VPN, you decide to enable IPsec performance acceleration to increase the rate of traffic that can be sent through the tunnel.
Referring to the exhibit, which two statements should you add to the configuration to accomplish this task? (Choose two.)
- A. [edit security flow]
user@srx# set load-distribution session-affinity ipsec - B. [edit security flow]
user@srx# set tcp-mss ipsec-vpn mss 65535 - C. [edit security flow]
user@srx# set power-mode-ipsec - D. [edit security flow]
user@srx# set ipsec-performance-acceleration
Answer: A,D
NEW QUESTION 41
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The link is protected against man-in-the-middle attacks
- B. Data is transmitted across the link in cyphertext
- C. The link is not protected against man-in-the-middle attacks
- D. Data is transmitted across the link in plaintext
Answer: B,C
NEW QUESTION 42
You have designed the firewall filter shown in the exhibit to limit SSH control traffic to yours SRX Series device without affecting other traffic.
Which two statement are true in this scenario? (Choose two.)
- A. Applying the filter will not achieve the desired result.
- B. The filter should be applied as an input filter on the loopback interface.
- C. Applying the filter will achieve the desired result.
- D. The filter should be applied as an output filter on the loopback interface.
Answer: A,B
Explanation:
Reference:
https://www.juniper.net/documentation//en_US/junos/topics/concept/firewall-filter-ex-series-evaluation-understanding.html
NEW QUESTION 43
Click the Exhibit button.
You deployed a site-to-site IPsec VPN connecting two data centers together using SRX5800s. After examining the performance of the IPsec VPN, you decide to enable IPsec performance acceleration to increase the rate of traffic that can be sent through the tunnel.
Referring to the exhibit, which two statements should you add to the configuration to accomplish this task?
(Choose two.)
- A. [edit security flow]
user@srx# set load-distribution session-affinity ipsec - B. [edit security flow]
user@srx# set tcp-mss ipsec-vpn mss 65535 - C. [edit security flow]
user@srx# set power-mode-ipsec - D. [edit security flow]
user@srx# set ipsec-performance-acceleration
Answer: A,D
NEW QUESTION 44
You have set up Security Director with Policy Enforcer and have configured 12 third-party feeds and a Sky ATP feed. You are also injecting 16 feeds using the available open API. You want to add another compatible feed using the available open API, but Policy Enforcer is not receiving the new feed.
What is the problem in this scenario?
- A. You cannot add more than 16 feeds through the available open API
- B. You have reached the maximum limit of 29 total feeds
- C. You must wait 48 hours for the feed to update
- D. You cannot add more than 16 feeds with the available open API
Answer: B
NEW QUESTION 45
You have a remote access VPN where the remote users are using the NCP client. The remote users can access the internal corporate resources as intended; however, traffic that is destined to all other Internet sites is going through the remote access VPN. You want to ensure that only traffic that is destined to the internal corporate resources use the remote access VPN.
Which two actions should you take to accomplish this task? (Choose two.)
- A. Configure split tunneling on the NCP profile on the remote client
- B. Configure the necessary traffic selectors within the VPN configuration on the SRX Series device
- C. Enable IKEv2 within the VPN configuration on the SRX Series device
- D. Enable the split tunneling feature within the VPN configuration on the SRX Series device
Answer: A,B
Explanation:
Reference:
vpns-with-ncp-exclusive-remote-access-client.html
NEW QUESTION 46
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The SRX Series device is not enrolled but can communicate with the JATP Appliance
- B. The JATP Appliance cannot download the security feeds from the GSS servers
- C. The SRX Series device is enrolled and communicating with a JATP Appliance
- D. The SRX Series device cannot download the security feeds from the JATP Appliance
Answer: A,D
NEW QUESTION 47
You are asked to implement the session cache feature on an SRX5400.
In this scenario, what information does a session cache entry record? (Choose two.)
- A. To which SPU the traffic of the session should be forwarded
- B. The type of processing to do for egress traffic
- C. The type of processing to do for ingress traffic
- D. To which NPU the traffic of the session should be forwarded
Answer: A,B
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-packet-based- forwarding.html
NEW QUESTION 48
Click the Exhibit button.
You are asked to look at a configuration that is designed to take all traffic with a specific source IP address and forward the traffic to a traffic analysis server for further evaluation. The configuration is not working as intended.
Referring to the exhibit, which change must be made to correct the configuration?
- A. Apply the filter as an input filter on interface xe-0/0/1.0
- B. Create a routing instance named default
- C. Apply the filter as an output filter on interface xe-0/1/0.0
- D. Apply the filter as an input filter on interface xe-0/2/1.0
Answer: A
NEW QUESTION 49
Click the Exhibit button.
You deployed a site-to-site IPsec VPN connecting two data centers together using SRX5800s. After examining the performance of the IPsec VPN, you decide to enable IPsec performance acceleration to increase the rate of traffic that can be sent through the tunnel.
Referring to the exhibit, which two statements should you add to the configuration to accomplish this task?
(Choose two.)
[edit security flow]
- A. user@srx# set load-distribution session-affinity ipsec
- B. user@srx# set ipsec-performance-acceleration
[edit security flow] - C. user@srx# set power-mode-ipsec
[edit security flow] - D. user@srx# set tcp-mss ipsec-vpn mss 65535
[edit security flow]
Answer: A,B
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-improving-ipsec- vpn-traffic-performance.html
NEW QUESTION 50
Click the Exhibit button.
Branch 1 and Branch 2 have an active VPN tunnel configured, but internal hosts cannot communicate with each other.
Referring to the exhibit, which type of configuration should be applied to solve the problem?
- A. Configure static NAT on both Branch 1 and Branch 2
- B. Configure source NAT on Branch 1
- C. Configure destination NAT on Branch 2 only
- D. Configure destination NAT on both Branch 1 and Branch 2
Answer: A
NEW QUESTION 51
Click the Exhibit button.
Which type of NAT is shown in the exhibit?
- A. NAT46
- B. NAT64
- C. DS-Lite
- D. persistent NAT
Answer: B
NEW QUESTION 52
You are asked to configure an SRX Series device to bypass all security features for IP traffic from the engineering department.
Which firewall filter will accomplish this task?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION 53
Exhibit.
A hub member of an ADVPN is not functioning correctly.
Referring the exhibit, which action should you take to solve the problem?
- A. [edit security]
user@hub-1# set ike gateway advpn-gateway advpn suggester disable - B. [edit interfaces]
user@hub-1# delete ipsec vpn advpn-vpn traffic-selector - C. [edit security]
user@hub-1# delete ike gateway advpn-gateway advpn partner - D. [edit interfaces]
root@vSRX-1# delete st0.0 multipoint
Answer: B
NEW QUESTION 54
You configured a security policy permitting traffic from the trust zone to the DMZ zone, inserted the new policy at the top of the list, and successfully committed it to the SRX Series device. Upon monitoring, you notice that the hit count does not increase on the newly configured policy.
In this scenario, which two commands would help you to identify the problem? (Choose two.)
- A. user@srx> show security shadow-policies from zone trust to zone DMZ
- B. user@srx> show security match-policies from-zone trust to-zone DMZ source-ip 192.168.10.100/32 destination-ip 10.10.10.80/32 protocol tcp source-port 5806 destination-port
- C. user@srx> show security zones trust detail
- D. user@srx> show security match-policies from-zone trust to-zone DMZ source-ip 192.168.10.100/32 destination-ip 10.10.10.80/32 protocol tcp source-port 5806 destination-port 443
Answer: A,B
Explanation:
443 result-count 10
NEW QUESTION 55
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. Destination NAT is occurring
- B. Static NAT without PAT is occurring
- C. Source NAT with PAT is occurring
- D. Source NAT without PAT is occurring
Answer: C
NEW QUESTION 56
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The configured solution allows IPv4 to IPv6 translation.
- B. The configured solution allows IPv6 to IPv4 translation.
- C. External hosts cannot initiate contact.
- D. The IPv6 address is invalid.
Answer: B,D
NEW QUESTION 57
You are asked to configure a new SRX Series CPE device at a remote office. The device must participate in forwarding MPLS and IPsec traffic.
Which two statements are true regarding this implementation? (Choose two.)
- A. Host inbound traffic must not be processed by the flow module
- B. Host inbound traffic must be processed by the flow module
- C. A firewall filter must be configured to enable packet mode forwarding
- D. The SRX Series device can process both MPLS and IPsec with default traffic handling
Answer: A,C
NEW QUESTION 58
You have configured three logical tunnel interfaces in a tenant system on an SRX1500 device. When committing the configuration, the commit fails.
In this scenario, what would cause this problem?
- A. The SRX1500 device does not support more than two logical interfaces per tenant system
- B. There is no VPLS switch on the tenant system containing a peer It-0/0/0 interface
- C. There is no GRE tunnel between the tenant system and master system allowing SSH traffic
- D. The SRX1500 device requires a tunnel PIC to allow for logical tunnel interfaces
Answer: B
NEW QUESTION 59
Malware that is detonated by the JATP sandbox must be able to communicate with the Internet without being able to harm your local network resources.
Which statement is correct in this scenario?
- A. The honeypot interface must be connected to the Internet zone
- B. The monitoring interface must be connected to the Internet zone
- C. The management interface must be connected to the Internet zone
- D. The exhaust interface must be connected to the Internet zone
Answer: C
NEW QUESTION 60
When would you use the port-overloading-factor 1 setting?
- A. to map ports with 1:1 ratio for port-overloading
- B. to set the maximum port-overloading capacity to 65,536
- C. to disable the port-overloading
- D. to enable the port-overloading
Answer: C
NEW QUESTION 61
A user is unable to reach a necessary resource. You discover the path through the SRX Series device includes several security features. The traffic is not being evaluated by any security policies.
In this scenario, which two components within the flow module would affect the traffic? (Choose two.)
- A. source NAT
- B. services/ALG
- C. destination NAT
- D. route lookup
Answer: A,B
NEW QUESTION 62
You are asked to configure an IPsec VPN between two SRX Series devices that allows for processing of CoS on the intermediate routers.
What will satisfy this requirement?
- A. OpenVPN
- B. remote access VPN
- C. policy-based VPN
- D. route-based VPN
Answer: D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/secuirty-cos-based-ipsec- vpns.html
NEW QUESTION 63
Click the Exhibit button.
When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit.
What is the cause of the error?
- A. The SRX Series device certificate does not match the JATP certificate
- B. A firewall is blocking HTTPS on fxp0
- C. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
- D. The fxp0 IP address is not routable
Answer: C
Explanation:
Explanation/Reference: https://kb.juniper.net/InfoCenter/index?
page=content&id=KB33979&cat=JATP_SERIES&actp=LIST
NEW QUESTION 64
......
Important Details to Know about JN0-635 Certification Test
The content covered by this JN0-635 exam is provided through recommended tutor-conducted courses and other comprehensive resources. You can obtain more information about this in the up and coming sections of this article. Also, you need to have the JNCIS-SEC certification as a prerequisite for the JNCIP-SEC certificate. To register for JN0-635 exam, create an account with Pearson VUE. You can choose a test center of your choice and then select JN0-635 in the list of tests. If you have already taken Juniper Networks evaluations before, you can register with your existing CertManager ID.
JN0-635 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://www.passleader.top/Juniper/JN0-635-exam-braindumps.html