[UPDATED 2023] Free Fortinet NSE7_EFW-7.0 Exam Questions Self-Assess Preparation
NSE7_EFW-7.0 Free Sample Questions to Practice One Year Update
The Fortinet NSE7_EFW-7.0 exam is a challenging certification exam that requires extensive preparation and study. Fortinet offers a range of training and certification programs to help individuals prepare for the exam. These programs include instructor-led training, online courses, and self-paced study programs. Fortinet's training and certification programs are designed to provide individuals with the knowledge and skills needed to pass the exam and become certified Fortinet professionals.
The NSE7_EFW-7.0 certification exam is a comprehensive test that takes about four hours to complete. Candidates are required to demonstrate their knowledge of the Fortinet Enterprise Firewall solutions through a series of multiple-choice questions and hands-on lab exercises. The exam is challenging and requires candidates to have a deep understanding of network security concepts and technologies. Passing the certification exam demonstrates a high level of expertise in network security and opens up new career opportunities for IT professionals in the field of network security.
NEW QUESTION # 10
Examine the output from the BGP real time debug shown in the exhibit, then the answer the question below:
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. BGP peers have successfully interchanged Open and Keepalive messages.
- B. Local BGP peer received a prefix for a default route.
- C. The state of the remote BGP peer will go to Connect after it confirms the received prefixes.
- D. The state of the remote BGP peer is OpenConfirm.
Answer: A,B
NEW QUESTION # 11
View the exhibit, which contains the partial output of a diagnose command, and then answer the question below.
Based on the output, which of the following statements is correct?
- A. DPD is disabled.
- B. Anti-reply is enabled.
- C. Quick mode selectors are disabled.
- D. Remote gateway IP is 10.200.5.1.
Answer: B
NEW QUESTION # 12
View the exhibit, which contains the output of a diagnose command, and then answer the question below.
What statements are correct regarding the output? (Choose two.)
- A. This is an expected session created by a session helper.
- B. Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.200.1.1.
- C. Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.0.1.10.
- D. This is an expected session created by an application control profile.
Answer: A,B
NEW QUESTION # 13
Four FortiGate devices configured for OSPF connected to the same broadcast domain. The first unit is elected as the designated router. The second unit is elected as the backup designated router.
Under normal operation, how many OSPF full adjacencies are formed to each of the other two units?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 14
View the exhibit, which contains the output of a BGP debug command, and then answer the question below.
Which of the following statements about the exhibit are true? (Choose two.)
- A. Since the counters were last reset; the 10.200.3.1 peer has never been down.
- B. The local router has received a total of three BGP prefixes from all peers.
- C. The local router's BGP state is Established with the 10.125.0.60 peer.
- D. The local router has not established a TCP session with 100.64.3.1.
Answer: C,D
NEW QUESTION # 15
Refer to the exhibit, which contains partial output from an IKE real-time debug.
The administrator does not have access to the remote gateway.
Based on the debug output, which configuration change can the administrator make to the local gateway to resolve the phase 1 negotiation error?
- A. In the phase 1 network configuration, set the IKE version to 2.
- B. In the phase 1 proposal configuration, add AESCBC-SHA2 to the list of encryption algorithms.
- C. In the phase 1 proposal configuration, add AES256-SHA256 to the list of encryption algorithms.
- D. In the phase 1 proposal configuration, add AES128-SHA128 to the list of encryption algorithms.
Answer: C
Explanation:
https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/238852
NEW QUESTION # 16
What does the dirty flag mean in a FortiGate session configured for NGFW policy mode?
- A. Traffic has been identified as coming from an application that is not allowed and the relevant replacement message needs to be displayed to the user, if configured.
- B. The existing session table entry has been updated with the app_id and the firewall policy table needs to be checked for a match.
- C. The URL category for this session has been updated by FortiGuard and the session needs to be checked against the policy again to ensure proper web filtering is applied.
- D. The application or URL category is unknown and needs to be rescanned by the IPS engine to try to identify the Layer 7 details.
Answer: B
Explanation:
Enterprise_Firewall_7.0_Study_Guide-Online.pdf p 99
NEW QUESTION # 17
An administrator cannot connect to the GIU of a FortiGate unit with the IP address 10.0.1.254. The administrator runs the debug flow while attempting the connection using HTTP.
The output of the debug flow is shown in the exhibit:
Based on the error displayed by the debug flow, which are valid reasons for this problem? (Choose two.)
- A. HTTP administrative access is disabled in the FortiGate interface with the IP address 10.0.1.254.
- B. Redirection of HTTP to HTTPS administrative access is disabled.
- C. HTTP administrative access is configured with a port number different than 80.
- D. The packet is denied because of reverse path forwarding check.
Answer: A,C
NEW QUESTION # 18
Which statements about bulk configuration changes using FortiManager CLI scripts are correct? (Choose two.)
- A. When executed on the Policy Package, ADOM database, changes are applied directly to the managed FortiGate.
- B. When executed on the Remote FortiGate directly, administrators do not have the option to review the changes prior to installation.
- C. When executed on the Device Database, you must use the installation wizard to apply the changes to the managed FortiGate.
- D. When executed on the All FortiGate in ADOM, changes are automatically installed without creating a new revision history.
Answer: B,C
NEW QUESTION # 19
Refer to the exhibit, which contains the output of diagnose sys session list.
If the HA ID for the primary unit is zero (0), which statement about the output is true?
- A. The master unit is processing this traffic.
- B. The inspection of this session has been offloaded to the slave unit.
- C. This session cannot be synced with the slave unit.
- D. This session is for HA heartbeat traffic.
Answer: A
NEW QUESTION # 20
Refer to the exhibit, which contains partial output from an IKE real-time debug.
Which two statements about this debug output are correct? (Choose two.)
- A. The initiator provided remote as its IPsec peer ID.
- B. It shows a phase 1 negotiation.
- C. The negotiation is using AES128 encryption with CBC hash.
- D. The remote gateway IP address is 10.0.0.1.
Answer: A,B
NEW QUESTION # 21
Which of the following statements is true regarding a FortiGate configured as an explicit web proxy?
- A. FortiGate limits the number of simultaneous sessions per explicit web proxy user. This limit CANNOT be modified by the administrator.
- B. FortiGate limits the number of workstations that authenticate using the same web proxy user credentials. This limit CANNOT be modified by the administrator.
- C. FortiGate limits the number of simultaneous sessions per explicit web proxy user The limit CAN be modified by the administrator
- D. FortiGate limits the total number of simultaneous explicit web proxy users.
Answer: D
NEW QUESTION # 22
Refer to the exhibit, which contains the partial output of the get vpn ipsec tunnel details command.
Based on the output, which two statements are correct? (Choose two.)
- A. Anti-replay is disabled.
- B. Hub2Spoke1 is a policy-based VPN.
- C. Phase 2 authentication is set to sha1 on both sides.
- D. Hub2Spoke1 is configured on interface wan2.
Answer: C,D
NEW QUESTION # 23
Examine the following partial outputs from two routing debug commands; then answer the question below:
Why the default route using port2 is not displayed in the output of the second command?
- A. It is disabled in the FortiGate configuration.
- B. It has a lower priority than the default route using port1.
- C. It has a higher distance than the default route using port1.
- D. It has a higher priority than the default route using port1.
Answer: C
NEW QUESTION # 24
View the exhibit, which contains the output of a debug command, and then answer the question below.
What statement is correct about this FortiGate?
- A. It is currently in FD conserve mode.
- B. It is currently in system conserve mode because of high CPU usage.
- C. It is currently in system conserve mode because of high memory usage.
- D. It is currently in kernel conserve mode because of high memory usage.
Answer: C
NEW QUESTION # 25
An administrator has configured two FortiGate devices for an HA cluster. While testing the HA failover, the administrator noticed that some of the switches in the network continue to send traffic to the former primary unit. The administrator decides to enable the setting link-failed-signal to fix the problem .
Which statement is correct regarding this command?
- A. Forces the former primary device to shut down all its non-heartbeat interfaces for one second while the failover occurs.
- B. Sends an ARP packet to all connected devices, indicating that the HA virtual MAC address is reachable through a new master after a failover.
- C. Disables all the non-heartbeat interfaces in all the HA members for two seconds after a failover.
- D. Sends a link failed signal to all connected devices.
Answer: A
NEW QUESTION # 26
When using the SSL certificate inspection method to inspect HTTPS traffic, how does FortiGate filter web requests when the client browser does not provide the server name indication (SNI) extension?
- A. FortiGate uses the CN information from the Subject field in the server certificate.
- B. FortiGate blocks the request without any further inspection.
- C. FortiGate uses the requested URL from the user's web browser.
- D. FortiGate switches to the full SSL inspection method to decrypt the data.
Answer: A
NEW QUESTION # 27
Which two statements about OCVPN are true? (Choose two.)
- A. FortiGate devices under different FortiCare accounts can be used to form OCVPN.
- B. OCVPN offers only Hub-Spoke VPNs.
- C. OCVPN supports static and dynamic IPs in WAN interface.
- D. Only root vdom supports OCVPN.
Answer: C,D
Explanation:
Reference:
https://docs.fortinet.com/document/fortigate/6.0.0/cookbook/977344/one-click-vpn-ocvpn
https://docs.fortinet.com/document/fortigate/6.2.9/cookbook/496884/overlay-controller-vpn-ocvpn
NEW QUESTION # 28
View the exhibit, which contains a session entry, and then answer the question below.
Which statement is correct regarding this session?
- A. It is a TCP session in CLOSE_WAIT state from 10.1.10.10 to 10.200.1.1.
- B. It is an ICMP session from 10.1.10.10 to 10.200.5.1.
- C. It is a TCP session in ESTABLISHED state from 10.1.10.10 to 10.200.5.1.
- D. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
Answer: B
NEW QUESTION # 29
An administrator has configured the following CLI script on FortiManager, which failed to apply any changes to the managed device after being executed.
Why didn't the script make any changes to the managed device?
- A. Static routes can only be added using TCL scripts.
- B. CLI scripts will add objects only if they are referenced by policies.
- C. Commands that start with the # sign are not executed.
- D. Incomplete commands are ignored in CLI scripts.
Answer: C
NEW QUESTION # 30
......
The Fortinet NSE7_EFW-7.0 exam is a vendor-specific exam that focuses on the Fortinet Enterprise Firewall technology. The exam covers a wide range of topics, including firewall policies, VPNs, user authentication, web filtering, application control, and more. The exam is designed to test the candidate's knowledge of Fortinet products, as well as their ability to apply this knowledge to solve real-world problems.
Real exam questions are provided for NSE 7 Network Security Architect tests, which can make sure you 100% pass: https://www.passleader.top/Fortinet/NSE7_EFW-7.0-exam-braindumps.html
Download NSE7_EFW-7.0 exam with Fortinet NSE7_EFW-7.0 Real Exam Questions: https://drive.google.com/open?id=1JfXjEMJgy2Dyi6dTGYXAKa6sfO2Dcgui