VMware 3V0-42.20 Practice Verified Answers - Pass Your Exams For Sure! [2021]
Valid Way To Pass VCAP-NV Design 2020's 3V0-42.20 Exam
Salary of Advanced Design VMware NSX-T Data Center 3.0 certified professionals
The salary of Advanced Design VMware NSX-T Data Center 3.0 certified professionals varies from $75K to $120K depending on the years of experience.
Understanding functional and technical aspects of Advanced Design VMware NSX-T Data Center 3.0 Installing, Configuring, and Setup
The following will be discussed in VMWARE 3V0-42.20 dumps:
- Design a VMware vSphereî virtual data center to support NSX-T Data Center requirements
- NSX-T Data Center Federation Design
- Design a data center rack solution to support scalability and high availability
- Review Federation design considerations
- Explain the VMware NSX-T⢠logical switching design concepts
- Understand the integration between NSX-T Data Center and vSphere with VMware Tanzuâ¢
- Design logical network services
- Explain virtual infrastructure design considerations
- Apply a design process for gathering requirements, constraints, assumptions, and risks
- Describe the design involved for Federation networking
- Design logical security services
- Understand and apply a design framework
- Describe how NSX-T Data Center provides networking, load balancing, and security in vSphere for VMware Tanzu
- NSX-T Data Center Design Considerations
- Explain the NSX-T Data Center and Virtual Cloud Network
- Understand the design and support for NSX-T Data Center infrastructure in a multi data center infrastructure
- List the collapsed management and VMware NSXî Edge⢠resources design considerations
- Describe the traffic flooding concepts
- Explain physical infrastructure design considerations
- Analyze existing physical networking and security components, processes, and operations
- List the NSX-T Management cluster design considerations
- Describe VMware Tanzu⢠Kubernetes Grid⢠Service
- Analyze alternative design choices for risk mitigation
- Logical Switching Design
- Explain dedicated management and NSX Edge resources design
- Design a physical network to support network virtualization in a software-defined data center
- NSX-T Data Center and Containers
- Describe the NSX-T Data Center architecture and use cases
- NSX-T Data Center Architecture and Components
- Explain the design concepts for Federation components
- Explain the Federation functionality
- Understand Tanzu Kubernetes Grid⢠cluster networking and load balancing capabilities
NEW QUESTION 34
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:
Customer is concerned with NSX Manager availability.
3 cabinets/racks are available in the data center.
No integration with 3rd party solution is required.
There is no budget for physical equipment acquisition.
The 3 cabinets/racks do not share the same L2 domain.
Which three selections should the architect include in their design to address the customer's concern with NSX Manager availability? (Choose three.)
- A. Use separate IP per NSX Manager appliance per rack.
- B. Use a physical/internal load-balancer with the cluster.
- C. Use another NSX Manager IP in case an appliance fails.
- D. Deploy a single active NSX Manager appliance in rack 1.
- E. Deploy an NSX Manager Appliance per rack and cluster them.
- F. Deploy 2 cold standby NSX Manager appliances in rack 2/3.
Answer: D,E,F
NEW QUESTION 35
A customer deploying NSX-T Data Center requires role based access controls be enforced in NSX Manager with these requirements:
* identity platform must be highly available
* authentication must be performed by customer's existing SAML identity provider
* MFA must be performed by administrator to gain access to NSX Manager
Which identity deployments would meet the customer's requirements? (Choose the best answer.)
- A. NSX Manager OAuth 2.0 registered to a 2-node Active Directory Federation Services cluster
- B. NSX Manager OAuth 2.0 registered to a 3-node VMware Identity Manager cluster.
- C. NSX Manager OAuth 2.0 registered to a 3-node Active Directory Federation Services cluster.
- D. NSX Manager OAuth 2.0 registered to a 2-node VMware Identity Manager cluster.
Answer: B
Explanation:
Explanation
NEW QUESTION 36
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
Which two statements should the architect consider as non-technical requirements? (Choose two.)
- A. The design should offer agility and freedom for application phases.
- B. Different vendors are used for the storage solution.
- C. All application servers have hardcoded IP addresses.
- D. Current business continuity and disaster recovery plans are based on tape technology.
- E. Any solution should add more value to current and future customers engagements.
Answer: A,D
NEW QUESTION 37
What would an architect recommend to a customer that wants to extend management to an additional data center through Layer 2, but does not want to add additional NSX-T licensing? (Choose the best answer.)
- A. Deploy a standalone NSX Controller.
- B. Deploy a standalone Edge as the IPSec VPN.
- C. Deploy a standalone NSX Manager.
- D. Deploy Autonomous Edge as the L2 VPN client.
Answer: D
Explanation:
Explanation/Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 38
An administrator is asked to improve Recovery Point Objective (RPO) and Recovery Time Objective (RTO) for Disaster Recovery (DR) in their company network. The network has a primary site and a secondary site. The ability to support outages with minimum loss of connectivity to the company's core application is a priority.
Which design should the administrator recommend? (Choose the best answer.)
- A. NSX-T Data Center using a registered third-party DR solution.
- B. NSX-T Data Center using Federation and dependencies set between primary and secondary sites.
- C. NSX-T Data Center using built-in standard automation DR and secondary site recovery setup.
- D. NSX-T Data Center using an Orchestrator to recover VMs across sites.
Answer: B
NEW QUESTION 39
An NSX-T Architect is working in a brownfield environment with 4 ESXi hosts. These constraints were documented:
new servers cannot be purchased
North/South bandwidth must be guaranteed
Top-of-Rack switches have additional uplinks
Which three recommendations should the architect implement? (Choose three.)
- A. Install Edge nodes on a separate cluster.
- B. Use a resource pool to deploy the Edge nodes on.
- C. Recommend obtaining 2 new physical NICs for the servers.
- D. Remove one of the ESXi hosts and install a bare-metal Edge.
- E. Use a resource pool for production workloads.
Answer: B,C,D
NEW QUESTION 40
Which is a family of solutions for data center designs that span compute, storage, networking, and management, serving as a blueprint for a customer's Software Defined Data Center (SDDC) implementations? (Choose the best answer.)
- A. VMware Validated Design
- B. VMware Cloud Foundation
- C. VMware POC Design
- D. VMware SDDC Design
Answer: A
NEW QUESTION 41
Refer to the exhibits.
Design Option1:
Design Option 2:
Design Option 3:
Design Option 4:
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
The conceptual design includes these requirements, assumptions, constraints, and risks:
* Critical applications must run across sites without changing IP address.
* Business continuity and disaster recovery (BCDR) plans will leverage a second site running vSphere.
* RTO/RPO must be reduced for recovery of applications on secondary site.
* IT Teams require automation tools for configuration.
Which Conceptual Design would the architect recommend to the customer? (Choose the best answer.)
- A. Design Option 3
- B. Design Option 2
- C. Design Option 1
- D. Design Option 4
Answer: C
NEW QUESTION 42
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
There are six hosts and hardware has already been purchased.
Customer is planning a collapsed Management/Edge/Compute cluster.
Each host has two 10Gb NICs connected to a pair of switches.
There should be no single point of failure in any proposed design.
Which virtual switch design should the architect recommend to the organization? (Choose the best answer.)
- A. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel and overlay traffic and assign a new virtual NIC.
- B. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMKernel and overlay traffic and assign both NICs.
- C. Create a vSphere Distributed Switch (vDS) for Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.
- D. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.
Answer: C
NEW QUESTION 43
An architect is designing a solution for containerization. The solution will include high availability and security using NSX-T Data Center. The architect plans to provide a basic required components list in the Logical Design.
Which solution should the architect recommend? (Choose the best answer.)
- A. 3 NSX Managers, 3 virtual NSX Edges, two Tier-0 gateways in Active/Standby, BGP configuration
- B. 1 NSX Manager, 2 virtual NSX Edges, two Tier-0 gateways in Active/Active, BGP configuration
- C. 2 NSX Managers, 2 virtual NSX Edges, one Tier-0 gateway, BGP configuration and a static route
- D. 3 NSX Managers, 3 virtual NSX Edges, one Tier-0 gateway and a static route and OSPF
Answer: A
NEW QUESTION 44
Which three choices are part of a Design Approach when discussing design alternatives and their effects? (Choose three.)
- A. performance
- B. backup
- C. cost
- D. security
- E. knowledge
- F. budget
Answer: A,D,E
NEW QUESTION 45
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
Some workloads should be moved to a Cloud Provider.
Extend network's VLAN or VNI across sites on the same broadcast domain.
Enable VM mobility use cases such as migration and disaster recovery without IP address changes.
Support 1500 byte MTU between sites.
Which selection should the architect include in their design? (Choose the best answer.)
- A. Load Balancer
- B. Reflexive NAT
- C. SSL VPN
- D. L2 VPN
Answer: D
NEW QUESTION 46
Which NSX-T feature is used to allocate the network bandwidth to business-critical applications and to resolve situations where several types of traffic compete for common resources? (Choose the best answer.)
- A. Network I/O Control Profiles
- B. LAG Uplink Profile
- C. LLDP Profile
- D. Transport Node Profiles
Answer: A
NEW QUESTION 47
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the assessment:
There must be a performance based SLA for East - West traffic.
Which two key performance features should the architect recommend? (Choose two.)
- A. Setup RSS to leverage multiple cores
- B. Enable GENEVE Offload
- C. Install advanced Edge pNIC Features
- D. Leverage DPDK drivers
- E. Configure N-VDS enhanced Data Path
Answer: A,B
NEW QUESTION 48
A Solution Architect will be deploying an Ethernet Virtual Private Network (EVPN) in their NSX-T Data Center environment.
What two selections must be prepared for the EVPN deployment? (Choose two.)
- A. deployed Tier-1 gateway
- B. remote gateway with support for MP-BGP and VXLAN
- C. deployed Tier-0 gateway
- D. deployed Load Balancer
- E. remote gateway with support for IGP and VLAN priority
Answer: B,D
Explanation:
Explanation/Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 49
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:
* Any proposed solution must provide low latency.
* Any proposed solution must provide high throughput.
* Customer is running stock trading applications.
Which two selections should the architect recommend to meet high-performance workload requirements?
(Choose two.)
- A. Leverage KVM as the compute host.
- B. Enable enhanced data path mode on the N-VDS.
- C. Use LACP for all uplink profiles.
- D. Enable latency sensitivity mode on the N-VDS.
- E. Leverage ESXi as the compute host.
Answer: B,E
NEW QUESTION 50
......
Understanding functional and technical aspects of Advanced Design VMware NSX-T Data Center 3.0 Architecture and Technologies
The following will be discussed in VMWARE 3V0-42.20 dumps:
- Describe VRF Lite and EVPN
- List NSX Edge VM design considerations
- NSX-T Data Center Edge Design
- Describe multitier routing
- Gather customer requirements
- Logical Routing Design
- Create a logical design for nsx-t data center
- Explain Bridge design considerations
- NSX-T Data Center Network Design
- Analyze and differentiate requirements, risks, constraints, assumptions and use cases based on current customer environment
- Describe the load balancer design considerations
- Explain High Availability and Router Placement
- Multi-compute workload domain design considerations
- Analyze manageability requirements
- L3 Multicast design considerations
- Explain IPv6 addressing and routing design concepts
- Explain the VPN design considerations
- Explain the functionality and considerations of using NAT, Proxy ARP, DHCP, and metadata proxy
- Explain the Identity Firewall design concepts
- Explain the Distributed Firewall design concepts
- Analyze security requirements
- Analyze performance requirements
- Explain NSX Edge BareMetal design considerations
- Map nsx-t data center solution dependencies
- NSX-T Data Center Security Design
- Map business requirements to the logical design
- Analyze scalability requirements
- Describe NSX Edge cluster design
- NSX-T Data Center Advanced Routing Design
- Analyze recoverability requirements
- Explain the Gateway Firewall design concepts
- Explain logical router components
- Describe the security policy methodology
- Analyze availability requirements
VMware 3V0-42.20 Pre-Exam Practice Tests | PassLeader: https://www.passleader.top/VMware/3V0-42.20-exam-braindumps.html
3V0-42.20 practice test questions, answers, explanations: https://drive.google.com/open?id=1plXdIhx7o-bQKL24OZ4Cst2HkpdCmlIk