
Get Ready to Boost your Prepare for your JN0-251 Exam with 79 Questions
Use Free JN0-251 Exam Questions that Stimulates Actual EXAM
NEW QUESTION # 47
You are troubleshooting a signal strength issue when you notice that the signal strength changes from -70 to -73 dBm as you move from one room to another.
In this scenario, what is happening?
- A. Signal strength has doubled.
- B. Signal strength has decreased by 10x.
- C. Signal strength has halved.
- D. Signal strength has increased by 10x.
Answer: B
Explanation:
According to the Wikipedia article on dBm1, a 10 dB increase in level is equivalent to a ten-fold increase in power, and a 10 dB decrease in level is equivalent to a ten-fold decrease in power. Therefore, a 3 dB change in level is approximately equivalent to doubling or halving the power.
In this scenario, the signal strength has changed from -70 dBm to -73 dBm, which is a 3 dB decrease in level. This means that the signal strength has halved, or decreased by 50%. To calculate the ratio of the signal strengths, we can use the following formula:
fracP1P2=10fracx1x210
where P1 and P2 are the powers in mW, and x1 and x2 are the levels in dBm. Plugging in the values from the scenario, we get:
fracP1P2=10frac-70-(-73)10=10frac310approx1.995
This means that the power at -70 dBm is about 2 times higher than the power at -73 dBm, or equivalently, the power at -73 dBm is about 0.5 times lower than the power at -70 dBm.
NEW QUESTION # 48
Which statement defines the total user minutes?
- A. The total number of minutes for which Mist has statistics for each client.
- B. The average number of minutes that all clients have been associated to the network.
- C. The total number of minutes between a client's last association and disassociation.
- D. The total amount of device uptime over the last seven days.
Answer: A
NEW QUESTION # 49
Which protocol does the REST API use?
- A. syslog
- B. HTTP
- C. SNMP
- D. SSL
Answer: B
Explanation:
Reference:
The protocol that the REST API uses is HTTP. HTTP stands for Hypertext Transfer Protocol and is a standard protocol for exchanging information between different applications or services over the internet. HTTP defines a set of methods, such as GET, POST, PUT, and DELETE, that specify the type of action to be performed on a resource. HTTP also defines a set of status codes, such as 200 OK, 404 Not Found, and 500 Internal Server Error, that indicate the outcome of the request.
The REST API is an application programming interface that conforms to the design principles of the REST, or representational state transfer, architectural style. REST APIs provide a flexible, lightweight way to integrate applications and to connect components in microservices architectures. REST APIs rely on HTTP to transfer a representation of the state of the resource to the requester or endpoint. The representation can be in various formats, such as JSON, XML, HTML, or plain text.
NEW QUESTION # 50
In the Mist Access Point portfolio, which dedicated device would be used in location-based services (LBS)?
- A. AP12
- B. AP32
- C. BT11
- D. AP34
Answer: C
NEW QUESTION # 51
Which statement is correct about Mist AP packet capture?
- A. You can configure a wired or wireless packet capture manually.
- B. You can only configure wireless packet captures manually.
- C. You can only trigger wired or wireless packet captures dynamically.
- D. You can only configure wired packet captures manually.
Answer: C
NEW QUESTION # 52
Besides providing AP configuration status, for which other purpose is the LED used in the location design phase?
- A. channels in use
- B. antenna orientation
- C. height orientation
- D. frequency selection
Answer: B
Explanation:
According to the web search results, the LED on a Mist AP can be used for antenna orientation in the location design phase, besides providing AP configuration status. The location design phase is the process of planning and deploying a wireless network that can provide accurate and reliable location services, such as indoor positioning, wayfinding, or asset tracking1. Antenna orientation is an important factor that affects the performance and accuracy of location services, as it determines the coverage and signal strength of the APs2.
The LED on a Mist AP can be used to indicate the antenna orientation by showing different colors and patterns depending on the angle of the AP3. For example, a blue LED means that the AP is facing down, a green LED means that the AP is tilted at 45 degrees, and a red LED means that the AP is facing up3. By using the LED as a guide, the network installer can easily adjust the angle of the AP to achieve the optimal coverage and location accuracy3. The LED can also be controlled remotely by using the Mist AI app or the Mist portal3.
Therefore, based on the web search results, the LED on a Mist AP can be used for antenna orientation in the location design phase, besides providing AP configuration status. This feature can help improve the quality and efficiency of location services in various scenarios, such as retail, hospitality, or healthcare1.
NEW QUESTION # 53
Besides providing AP configuration status, for which other purpose is the LED used in the location design phase?
- A. channels in use
- B. antenna orientation
- C. height orientation
- D. frequency selection
Answer: B
NEW QUESTION # 54
Which protocol is used by Mist access points to discover third-party switches?
- A. ICMP
- B. SNMP
- C. LLDP
- D. CDP
Answer: C
Explanation:
Reference:
The protocol that is used by Mist access points to discover third-party switches is LLDP. LLDP stands for Link Layer Discovery Protocol and is a vendor-neutral protocol that allows devices to advertise and discover information about their identity, capabilities, and neighbors on a local area network. LLDP operates on the data link layer (Layer 2) of the OSI model and uses multicast frames to exchange information.
Mist access points use LLDP to discover the switch name, model, firmware version, port number, VLAN ID, and PoE status of the connected third-party switches. This information is then sent to the Mist cloud, where it is processed and displayed in the Mist portal. You can view the switch details and topology in the Switches tab of the Mist portal1. You can also use the Marvis virtual network assistant to query the switch information using natural language commands.
NEW QUESTION # 55
You want to review client information about a specific AP.
In this scenario, where in the UI would you look?
- A. Access Points
- B. SLEs
- C. AP Insights
- D. Client Insights
Answer: D
NEW QUESTION # 56
Alert templates are assigned to sites in which area of the Mist GUI?
- A. Site Configuration
- B. Alert Template Configuration
- C. Site Group
- D. Organization Settings
Answer: B
NEW QUESTION # 57
Which protocol is used by Mist access points to discover third-party switches?
- A. CDP
- B. ICMP
- C. SNMP
- D. LLDP
Answer: A
NEW QUESTION # 58
You want to obtain detailed information on a wireless client.
In this scenario, which area would you use to accomplish this task?
- A. Templates
- B. Security
- C. SLEs
- D. Insights
Answer: D
Explanation:
The area that you would use to obtain detailed information on a wireless client is the Insights area. The Insights area provides a comprehensive view of the wireless network performance and user experience, including the client dashboard, the live view, the service-level expectations (SLEs), and the Marvis virtual network assistant.
The client dashboard allows you to view and search for individual wireless clients and see their connection details, such as device type, MAC address, IP address, SSID, AP name, signal strength, throughput, data usage, location, and more. You can also perform actions on the clients, such as block, unblock, or capture packets.
The live view allows you to monitor the real-time status and activity of the wireless network and clients. You can see the number of connected clients, the traffic volume, the SLE scores, the top APs and SSIDs, and more. You can also filter and drill down into specific clients, APs, SSIDs, or sites.
The SLEs allow you to define and measure the quality of service and user experience for the wireless network. You can set thresholds and goals for key metrics, such as throughput, coverage, capacity, roaming, uptime, and WAN. You can also receive alerts and recommendations when the SLEs are violated.
The Marvis virtual network assistant allows you to interact with the wireless network using natural language commands. You can ask questions, troubleshoot issues, perform actions, and get insights from Marvis. For example, you can ask Marvis to show you the details of a wireless client or to explain why a client had a poor connection.
NEW QUESTION # 59
Which characteristic describes Mist's cloud software architecture?
- A. microservices based
- B. monolithic code
- C. shard based
- D. controller based
Answer: A
NEW QUESTION # 60
What is an advantage of using the Juniper Mist cloud compared to traditional on-premises WLAN controllers?
- A. Machine learning occurs through microservices.
- B. Mist updates occur daily.
- C. More robust AP encryption occurs.
- D. The ability to configure Mist cloud using any connected AP.
Answer: A
Explanation:
The Juniper Mist cloud delivers a modern microservices cloud architecture to meet your digital transformation goals for the AI-Driven Enterprise1. Machine learning is one of the key technologies that enables the cloud to automate key tasks and proactively address networking issues before they impact the quality-of-service levels2. Microservices are a way of designing software applications as a collection of independently deployable, small, modular services, each running a unique process and communicating through APIs3. This allows for faster and more scalable development, deployment, and maintenance of cloud services.
NEW QUESTION # 61
What is a Mist Coverage SLE based upon?
- A. a summary of switch data
- B. an average across APs
- C. an average of client data
- D. a summary of user minutes
Answer: D
Explanation:
Reference:
A Mist Coverage SLE is based upon a summary of user minutes. A user minute is defined as one minute of active client connection to the wireless network. A Mist Coverage SLE tracks the number of user minutes that a client's received signal strength indicator (RSSI) as measured by the access point is below the threshold configured by the network administrator. The RSSI is a measure of how well a client can hear the access point's signal. A low RSSI indicates poor coverage and can result in low throughput, high latency, or dropped connections.
The Mist Coverage SLE allows the network administrator to monitor and troubleshoot the coverage issues on the wireless network. The Mist Coverage SLE also provides classifiers that identify the root causes of poor coverage, such as asymmetry, interference, or low transmit power. The network administrator can use the Mist portal, the Marvis virtual network assistant, or the Mist API to view and manage the Mist Coverage SLE.
NEW QUESTION # 62
The status of user authentication will affect which pair of SLEs?
- A. Time to Connect and Throughput
- B. Coverage and Roaming
- C. Capacity and Successful Connects
- D. Successful Connects and Time to Connect
Answer: C
NEW QUESTION # 63
How should APs be deployed for location-based services (LBS)?
- A. with the AP mounted on a wall
- B. with the LED facing the floor
- C. with the LED facing a wall
- D. with the LED facing the ceiling
Answer: A
NEW QUESTION # 64
Which machine learning method involves rewarding and punishing an agent?
- A. deep learning
- B. reinforcement learning
- C. unsupervised learning
- D. supervised learning
Answer: B
NEW QUESTION # 65
......
Juniper JN0-251 (Mist AI, Associate (JNCIA-MistAI)) Certification Exam covers a wide range of topics related to wireless network management and optimization using Mist AI technology. JN0-251 exam is designed to test the candidate's understanding of various concepts such as network design, implementation, troubleshooting, and optimization. Mist AI, Associate (JNCIA-MistAI) certification program is ideal for IT professionals who are responsible for managing wireless networks in small to medium-sized enterprises.
The JN0-251 exam is a 65-question, multiple-choice exam that can be taken at any Pearson VUE testing center worldwide. JN0-251 exam has a time limit of 90 minutes, and candidates must score at least 65% to pass. JN0-251 exam includes questions on various topics, including wireless access points, controllers, Junos OS fundamentals, and network automation using Juniper Mist AI technology. Passing the JN0-251 exam validates the candidate's understanding of Juniper Mist AI technology, and it can help professionals advance their careers in the networking field.
BEST Verified Juniper JN0-251 Exam Questions (2024) : https://www.passleader.top/Juniper/JN0-251-exam-braindumps.html
Get 100% Real JN0-251 Free Online Practice Test: https://drive.google.com/open?id=1JG3n2kvojTKKOw89B-U_K_BpNcjA_3BI