Free Cisco (500-220) Certification Sample Questions with Online Practice Test
500-220 Certification Study Guide Pass 500-220 Fast
NEW QUESTION # 15
Which Cisco Meraki best practice method preserves complete historical network event logs?
- A. Configuring Dashboard logging to preserve only certain event types.
- B. Configuring the preserved event number to maximize logging.
- C. Configuring a syslog server for the network.
- D. Configuring the preserved event period to unlimited.
Answer: B
NEW QUESTION # 16
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.
Answer:
Explanation:
Explanation
The settings that will be cloned using the Cisco Meraki MS switch cloning feature are:
port name
interface type
STP bridge property
The settings that will not be cloned using the Cisco Meraki MS switch cloning feature are:
switch management IP
switch name
NEW QUESTION # 17
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. SET
- B. GET
- C. PUT
- D. ADD
- E. PATCH
- F. POST
Answer: B,C,F
Explanation:
Explanation
Verbs in the API follow the usual REST conventions:
GET returns the value of a resource or a list of resources, depending on whether an identifier is specified.
POST adds a new resource
PUT updates a resource
DELETE removes a resource
https://documentation.meraki.com/General_Administration/Other_Topics/Cisco_Meraki_Dashboard_API
NEW QUESTION # 18
A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application.
What does the "NotNow" event indicate?
- A. The application requires the most recent iOS version.
- B. The device is locked with a passcode.
- C. The device cannot connect to Cisco Meraki servers.
- D. The device cannot connect to Apple servers.
Answer: B
Explanation:
Explanation
The error message "NotNow" is seen in the Event Log on an iOS device's details page when an action cannot be performed because the device is locked with a passcode. These actions include pushing managed apps, installing profiles, and other actions. When this occurs the device will attempt to re-connect with the MDM server as soon as the device is unlocked in order to retry the action.
https://documentation.meraki.com/SM/Monitoring_and_Reporting/Status_of_%22NotNow%22_in_Systems_Ma
NEW QUESTION # 19
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- B. WebEx traffic will prefer WAN 2 as long as it is up.
- C. WebEx traffic will be load-balanced between both active WAN links.
- D. WebEx traffic will prefer WAN 1 as it is the primary uplink.
Answer: A
Explanation:
Explanation
Assuming this MX has established a full tunnel with its VPN peer, the MX will route the WebEx traffic based on the SD-WAN policy configured in the exhibit. The SD-WAN policy has two performance classes: Conf and Default. The Conf performance class matches the traffic with destination port 9000, which is used by WebEx for VoIP and video RTP3. The Conf performance class has a preferred uplink of WAN 2 and a failover uplink of WAN 1. It also has thresholds for latency, jitter, and loss that determine when to switch from the preferred uplink to the failover uplink. Therefore, the WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the Conf performance class. If WAN 2 exceeds the thresholds or goes down, the WebEx traffic will switch to WAN 1 as the failover uplink.
NEW QUESTION # 20
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
- A. Dual band operating with Band Steering
- B. Content filtering
- C. 802.11r
- D. Bridge mode
Answer: A
Explanation:
Explanation
When band steering is enabled on an SSID, APs will stop advertising that SSID in 2.4GHz beacons. Since
2.4GHz-only clients that rely on a passive scan will not "see" that SSID in beacons, they might not be able to join this SSID unless they do an active scan or have been pre-configured with the SSID name and security settings (for example, a pre-shared key).
https://documentation.meraki.com/MR/Radio_Settings/Band_Steering
NEW QUESTION # 21 
Refer to the exhibit. What Is the ratio of internet-bound flows that route via WAN 1 compared with WAN 2?
- A. All flows egress via WAN1.
- B. All flows agrees via WAN 1:1 ratio.
- C. All flows alternate in a 2:1 ratio.
- D. All flows alternate in a 5:1 ratio.
Answer: B
Explanation:
Explanation
https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Prefere
NEW QUESTION # 22
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection.
How many tunnels does each hub need to support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
https://documentation.meraki.com/Architectures_and_Best_Practices/Auto_VPN_Hub_Deployment_Recommen This is the number of tunnels that each hub needs to support in a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection. This can be calculated by using the formula for the hub tunnel count in a hub-and-spoke topology1:
Hub Tunnel Count = (H x (H - 1) / 2 x L1) + (H x S x L1 x L2)
Where H is the number of hubs, S is the number of spokes, L1 is the number of uplinks for the hubs, and L2 is the number of uplinks for the spokes. In this case, H = 2, S = 50, L1 = 2, and L2 = 1. Therefore, Hub Tunnel Count = (2 x (2 - 1) / 2 x 2) + (2 x 50 x 2 x 1) Hub Tunnel Count = (2 x 1 / 2 x 2) + (200 x 2) Hub Tunnel Count = (2 / 2 x 2) + (400) Hub Tunnel Count = (1 x 2) + (400) Hub Tunnel Count = 2 + 400 Hub Tunnel Count = 402 This question is related to the topic of Auto VPN Hub Deployment Recommendations in the Cisco Meraki documentation. You can find more information about this topic in the Auto VPN Hub Deployment Recommendations article or the Meraki Auto VPN General Best Practices page.
NEW QUESTION # 23
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)
- A. Call Meraki support.
- B. License a network.
- C. Renew the Dashboard license.
- D. License more devices.
- E. Wait for the devices to auto-renew.
Answer: C,D
Explanation:
Explanation
There are two operations in which a license can be applied, License more devices or Renew my dashboard license. This article will compare both operations and describe their behaviors.
https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_-_License_More_Devi These are the two operations that enable licenses to be applied in an organization that uses the Co-Termination licensing model. According to the Meraki Co-Termination Licensing Overview, there are two ways to add licenses to an organization:
Renewing the Dashboard license: This option allows you to extend the co-termination date of your organization by purchasing new licenses for the same or longer term as your existing licenses. You can renew your Dashboard license from the Organization > Configure > License Info page or from the Meraki Dashboard homepage.
Licensing more devices: This option allows you to add new devices to your organization by purchasing new licenses for them. You can license more devices from the Organization > Inventory page or from the Meraki Dashboard homepage.
NEW QUESTION # 24
Refer to the exhibit.
What are the Loss and Average Latency statistics based on?
- A. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
- B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
- C. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
- D. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
Answer: D
Explanation:
Explanation
Quote from referred documentation-Link: Loss and latency will be determined over the configured IP address under Security and SD-WAN > SD-WAN and Traffic Shaping > Uplink Statistics. If no IP is configured, these values will be measured against 8.8.8.8 by default. On the WAN Health page, all the configured IP address statistics can be reviewed by changing the destination under the "Ping Destination" column.
https://documentation.meraki.com/MI/MI_WAN_Health#:~:text=Current%20loss%20and%20latency%20statist
NEW QUESTION # 25
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. SET
- B. GET
- C. PUT
- D. ADD
- E. PATCH
- F. POST
Answer: B,C,F
Explanation:
Reference:
Cisco_Meraki_Dashboard_API
NEW QUESTION # 26
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
- A. highest VLAN ID that is configured and set to NO to use VPN
- B. lowest VLAN ID that is configured and set to YES to use VPN
- C. highest VLAN ID that is configured and set to YES to use VPN
- D. lowest VLAN ID configured and set to NO to use VPN
Answer: C
Explanation:
Explanation
See Behavior - Firmware MX 15.11 or Lower section For MXs running firmware MX15.11 or below, the source IP that MX uses while pinging a destination is the MX IP of highest VLAN ID. If the destination is across a VPN, the MX uses the MX IP of highest VLAN ID participating in VPN. For MXs running firmware MX 15.12+, additional ping options have been added to the live tool. The ping tool now has a drop down to select the source IP address for pinging destinations from the MX.
https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Ping_Live_T
NEW QUESTION # 27
The WAN connection of a Cisco Meraki MX security appliance is congested, and the MX appliance is buffering the traffic from LAN ports going to the WAN ports. High, normal, and low priority queue buffers are all full. Which proportion of the normal traffic is forwarded compared to the other queues?
- A. 2/10 packets
- B. 2/7 packets
- C. 4/10 packets
- D. 5/15 packets
Answer: B
Explanation:
Explanation
https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/SD-WAN_and_Traffic_Shaping
NEW QUESTION # 28
How does a Meraki device behave if cloud connectivity is temporarily lost?
- A. The offline device stops passing traffic.
- B. The offline device tries to form a connection with a local backup sever.
- C. The offline device reboots every 5 minutes until connection is restored.
- D. The offline device continues to run with its last known configuration until cloud connectivity is restored.
Answer: B
NEW QUESTION # 29
What are two roles of the network and device tags in a Dashboard? (Choose two.)
- A. Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.
- B. Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.
- C. Tags enable administrators to configure a combination of network and device specific tags to create summary reports filtered for specific devices across multiple networks.
- D. Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.
- E. Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.
Answer: C,E
Explanation:
Reference:
Organization_Menu/Manage_Tags
NEW QUESTION # 30
Refer to the exhibit.
What is an advantage of implementing inter-VLAN routing on an MX Security Appliance rather than performing inter-VLAN routing on an MS Series Switch?
- A. The MX appliance performs IDS/IPS for inter-VLAN traffic.
- B. The MX appliance performs AMP for inter-VLAN traffic.
- C. The MX appliance performs data encryption for inter-VLAN traffic.
- D. The MX appliance performs content filtering for inter-VLAN traffic.
Answer: C
NEW QUESTION # 31
One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used.
Based on client count, how many APs (rounded to the nearest whole number) are needed?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best
NEW QUESTION # 32
......
Get Perfect Results with Premium 500-220 Dumps Updated 74 Questions: https://www.passleader.top/Cisco/500-220-exam-braindumps.html
500-220 Dumps PDF 2024 Program Your Preparation EXAM SUCCESS: https://drive.google.com/open?id=1uj73BSxdWP0j5bTXyVLCMXD2y1OpxzdS