Table of Acronyms

An HP Comware switch is configured with the MDC feature. It has three MDCs, which use the same CPU and are assigned these CPU weights:
-MDC 1 = 10 -MDC 2 = 4 -DC 3 = 2
Currently:
-MDC 1 needs to use 25 percent of the CPU resources. -MDC 2 needs to use 60 percent of the CPU resources. -MDC 3 needs to use 60 percent of the CPU resources.
Approximately what percentage of the CPU does each MDC receive while at the current CPU request rates?

• A. MDC 1 = 25 percent, MDC 2 = 50 percent, and MDC 3 = 25 percent
• B. MDC 1 = 25 percent. MDC 2 = 25 percent, and MDC 3 = 12 percent
• C. MDC 1 = 63 percent, MDC 2 = 25 percent, and MDC 3 = 12 percent
• D. MDC 1 = 10 percent. MDC 2 = 4 percent, and MDC 3 = 2 percent

Explanation: Only visible for PassLeader members. You can sign-up / login (it's free).

A company has an HP Unified Wired-Wireless controller that controls HP MultiService Mobility (MSM) APs. The network administrator wants to implement protection against rogue APs in the company's campus environment. Only APs that have approved MAC addresses should be allowed to operate and support clients. Controlled APs should send disassociation frames to prevent clients from connecting to rogue APs.
The administrator sets up APs to monitor the area and creates a permitted MAC address list with the approved AP MAC addresses. The administrator has not configured any other Intrusion Detection System (IDS) settings. Which additional step must the administrator complete?

• A. Deploy the permitted MAC address list as a static attack list to each controlled AP
• B. Configure the permitted vendor and permitted SSID lists.
• C. Enable countermeasures.
• D. Enable a dynamic blacklist.

Table of Acronyms Refer to the exhibit.


An administrator is setting up MPLS Layer 2 VPN connections between several customer sites:
-Connection 1 = Customer site 1 to customer site 2 -Connection 2=Customer site 1 to customer site 3
On PE-1, interface GigabitEthernet1/0/1 connects to CE-1 at site 1. Which setup establishes the desired connections?

• A. CE-1 connects to CE-2 in one VLAN, which it assigns to VPN instance 1. It connects to CE-3 in a different VLAN, which it assigns to VPN instance 2. PE-1 instant places G1/0/1 in both VPN instances 1 and 2 and associates each VPN instance with a PW for one of the connections.
• B. PE-1 has two policy-based routing (PBR) policies, each of which selects traffic destined to Site 2 or Site 3. The appropriate policy is applied to the PW for each connection
• C. CE-1 implements MPLS. It establishes two PWs with PE-1, one for its connection to CE-2 and one for its connection to CE-3. PE-1 maps the out label for the first PW to the in label for a PW to PE-2. It maps the labels similarly for a PW to PE-3.
• D. CE-1 connects to CE-2 in one VLAN and to CE-3 in a different VLAN. PE-1 has two services instances on G1/D/1. One instance encapsulates one VLAN ID and has PW to PE-2, and the other instance encapsulates the other VLAN and has a PW to PE-3

A company has an HP Network Protector SDN Application with these characteristics:
-The Network Protector whitelist for all user VLANs includes site1.example.com.
-The blacklist for all user VLANs includes site1.example.com with a time range of 9:00 to 17:00.
-The Rep DV database includes site1example.com with a reputation score of 90.
An endpoint attempts to browse to site1.example.com. How does Network Protector classify DNS
requests for site1.example.com?

• A. It always flags the requests as threats.
• B. It flags the requests as threats between 17:00 and 9:00.
• C. It flags the requests as threats between 9:00 to 17:00.
• D. It never flags the requests as threats.

Table of Acronyms

Refer to the exhibit.

An administrator is planning an MPLS and VPLS Martini to connect customer sites 1, 2, and 3. How many pseudo must the administrator define?

• A. Six-twoeach on PE-1, PE-2, and PE-3
• B. Two-two on PE-1, with one connected to PE-2 and PE-3
• C. Four-two on PE-1, one on PE-2 m and one on PE-3
• D. Three-one each on PE-1, PE-2, and PE-3