You are responding to the customer's RFP and are at the point of documenting design decisions that were not specified in the RFP or the RFP questions. What are valid examples of assumptions made that should be presented to the customer during the response? (Choose three.)

• A. Adequate virtual machine resources exist to successfully install required or optional management systems.
• B. The customer has technical staff that is capable of implementing the proposed equipment.
• C. Optional monitoring systems (syslog, How collectors) exist.
• D. The customer budget Is sufficient to afford the proposed solution.
• E. Sufficient space and power exist to rack and turn up the proposed equipment.
• F. Vendor equipment availability will meet customer project timelines.

Explanation: Only visible for PassLeader members. You can sign-up / login (it's free).

A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests Each ship has a LAN infrastructure consisting of two core switches, up to
10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch. The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single 0M2 pair to the IDF. the maximum length is 60 meters (200 ft).
Each technical room is connected by a single 0M2 pail to the IDF. with lengths between 100 and
150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs). the customer has no change in WLAN requirements. The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed. The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing trie security of the wired network Infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They nave heard about dynamic segmentation and central and decentral overlay networks.
What would you advise as the most cost-efficient solution?

• A. Standardize on Aruba 6200 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
• B. Standardize on Aruba 6000 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
• C. Standardize on Aruba 6300 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
• D. Standardize on Aruba 6100 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.

Explanation: Only visible for PassLeader members. You can sign-up / login (it's free).

What is the difference between OM4 and OM5 cabling? (Choose two.)

• A. OM4 supports distances up to 100 m. while OM5 supports distances up to 150 m using 100 GBps transceivers.
• B. OM5 supports Multiplexing operating in the 850 to 950 nm range, while OM4 does not
• C. OM5 supports speeds up to 100 Gbps, while OM4 does not.
• D. OM5 is approved as wide Band Multimode Fiber (WBMMF), while OM4 is not.

Explanation: Only visible for PassLeader members. You can sign-up / login (it's free).

Which is true with regard to device capabilities?

• A. Wi-Fi 6E supports 6 GHz for both indoor and outdoor deployments since it was ratified in April of
  2020.
• B. You should determine if devices support 2.4 GHz or 5 GHz. No consideration is yet required for 6 GHz as it has yet to be ratified.
• C. HPE Aruba Networking's best practice is to use whatever the AP model supports as a maximum.
• D. HPE Aruba Networking recommends 40-50 devices per radio for a generic office deployment.

Explanation: Only visible for PassLeader members. You can sign-up / login (it's free).

A global furniture retail company called 'No-Stair Inc.' requests you design their new WLAN infrastructure for a global footprint. Each location of 'No-Stair Inc." has a similar layout: three small manager offices, a warehouse, and a 'retail' area. The 'retail' area and the warehouse together amount to 95% of the location. The IT department of the company is minimally engaged in their LAN refresh so the CTO of the company has shared the information below.
Current WLAN Infrastructure is based on the 802.11n "WIFI4Less" access-points series (both model 2013-INT (2.4 only internal antenna) and model 2019-EXT (dual-band external antenna only). These AP models are standalone without any centralized management. Last year 'No-Stair Inc.' ran a project called 'secure-it' ensuring that all needed network security was implemented to be fully compliant with their security standards. During this project, they also upgraded the AAA.
Infrastructure to handle the increased AAA requests. No additional Wi-Fi or security requirements are listed for this WLAN refresh, which means that 'No-Stair Inc.' will continue to use bridged SSIDs, with local breakout into different VLANs.
The CTO of 'No-Stair Inc.' understands the need for you to ask additional questions to deliver the design. The questions may be sent in written form and will be answered within two weeks.
What is a possible constraint?

• A. Does the existing WAN infrastructure support an upgraded Wi-Fi Network?
• B. Does the existing wired network support enough PoE for an upgraded Wi-Fi Network?
• C. Does the existing core switch support an upgraded Wi-Fi Network?
• D. Does the existing AAA infrastructure support an upgraded Wi-Fi Network?

Explanation: Only visible for PassLeader members. You can sign-up / login (it's free).